| Battery Replacement - Main + Sub Battery | $180.00 |
| Battery Replacement | $105.00 |
Same day repair
Samsung Galaxy Z Flip 3 screen repair at FixUPP is available across five Melbourne locations: Windsor, Springvale, Frankston, Brighton, and Somerville. Services cover the screen, battery, back glass, camera, and charging port. Outer Cover Screen replacement starts from $170, with Inner Main Screen replacement from $370. Most screen repairs are completed same-day, backed by a 12-month warranty against manufacturer defects.
Readmore
Select your preferred screen quality
| Outer Screen Replacement | $170.00 |
| Main (BIG) Screen Replacement | $370.00 |
Other Samsung Galaxy Z Flip 3 repairs:
| Battery Replacement - Main + Sub Battery | $180.00 |
| Battery Replacement | $105.00 |
| Back Glass Replacement | $115.00 |
| Rear Camera Lens Replacement | $65.00 |
| Rear Camera Replacement | $110.00 |
| Charging Port Replacement | $100.00 |
⏱️ 45-90 min
Warranty: 12 months
$560.00</strong >
Price includes parts & labour
FixUPP offers two distinct Samsung Galaxy Z Flip 3 screen replacement services: an Outer Cover Screen Replacement and an Inner Main Screen Replacement. Both services use Genuine Samsung Service Pack parts only.
Outer Cover Screen Replacement
Quick & Convenient
Inner Folding Screen Replacement
Foldable Experience
What is it?
Replacement of the rigid 1.9-inch exterior Super AMOLED display used when the device is folded shut.
Replacement of the flexible 6.7-inch Ultra-Thin Glass (UTG) main display used when the device is unfolded.
Est. Price
$170
$370
Performance
Restores sharp clarity and touch sensitivity for widgets, notifications, and selfies.
Restores the vibrant main view, the 120Hz adaptive refresh rate, and the folding mechanism.
Warranty
12 months
12 months
Not sure which service fits your situation? Visit any FixUPP location in Melbourne to view screen samples and speak with a technician.
FixUPP has completed over 300,000 device repairs across Melbourne since 2014. The Samsung Galaxy Z Flip 3 is a structurally complex clamshell foldable, and after several years of daily fold cycles its repair demands specialised knowledge well beyond standard phone servicing.
Same-Day Service
Most Samsung Galaxy Z Flip 3 screen repairs are finished within 2 to 4 hours, so you collect a working device the same day.
Genuine Samsung Display
Every replacement uses Genuine Samsung Service Pack parts exclusively, the same components fitted in Samsung’s own service centres, with no aftermarket substitutes.
Professional Equipment
Our workshops carry specialised tooling for foldable disassembly, hinge re-alignment, and display bonding.
12-Month Warranty
Each screen repair is covered for 12 months against defects in parts and workmanship. Physical and liquid damage are excluded.
Hinge Calibration
After any Inner Display replacement, technicians recalibrate the Flex Hinge for the correct fold angle and long-term tension.
Dedicated Support
Our technicians assess the specific damage on your device and advise on the right repair before any work begins.
FixUPP completes most Samsung Galaxy Z Flip 3 screen replacements in 2 to 4 hours, with same-day service across Melbourne. Turnaround varies with parts availability and how far the damage extends, but speed never comes ahead of build quality.
Walk-In Repair
Drop in at any of the five Melbourne locations (Windsor, Springvale, Frankston, Brighton, or Somerville) and collect your repaired device within 2 to 4 hours.
Mail-In Repair
Post your Galaxy Z Flip 3 to our Reply Paid address for fast, reliable repair. Same-day turnaround applies to most fixes, with free return shipping included.
Common Samsung Galaxy Z Flip 3 screen issues affect either the outer cover display or the inner folding panel, and each side fails in its own pattern because of the dual-screen architecture.
Symptoms: fracture lines across the small 1.9-inch cover window, sharp edges around the break, and touch input that stops responding in the cracked zone.
Solution: Outer Cover Screen Replacement.
Symptoms: a deepened fold crease with visible discolouration, dead pixels tracking along the fold line, or touch dropouts concentrated at the crease. On a device this age, the fault often develops gradually over thousands of fold cycles.
Solution: Inner Folding Screen Replacement.
Symptoms: permanently black or coloured pixel clusters on the inner display that stay fixed no matter what content is shown.
Solution: Inner Display Replacement.
Symptoms: sections of the inner or outer screen ignore touch, ghost touches trigger without contact, and multi-touch gestures become unreliable.
Solution: screen replacement with post-installation digitiser calibration.
Symptoms: a dark, spreading shadow or ink-like blotch on the inner display, even while the outer surface looks intact.
Solution: Inner Display Replacement.
Symptoms: the inner display lifts away from the frame near the hinge, leaving a visible gap between the panel edge and the chassis as the phone opens or closes.
Solution: display re-bonding, or Inner Screen Replacement combined with hinge recalibration.
FixUPP restores the Samsung Galaxy Z Flip 3 through a six-step technical process. The clamshell architecture (dual displays, a multi-barrel hinge, and flex cables routed across two chassis halves) means the full process takes 2 to 4 hours.
Multi-Display Diagnostics
10 minutes
Specialised Thermal Disassembly
25 minutes
Hinge and Frame Preparation
15 minutes
Precision Component Migration
40 minutes
Sensor Calibration
20 minutes
Folding Stress Test and Quality Control
20 minutes
1. Multi-Display Diagnostics
Technicians run a dual-screen assessment of the inner 6.7-inch Foldable Dynamic AMOLED 2X, the outer 1.9-inch Super AMOLED Cover Display, and the Hall sensor that reads the fold state. Hinge range of motion and the condition of the factory screen protector are logged before work starts.
2. Specialised Thermal Disassembly
Precision suction tools separate the chassis without stressing the dual-battery system or the ribbon cables that bridge the two halves of the phone.
3. Hinge and Frame Preparation
FixUPP fits a Genuine Samsung Service Pack, a pre-assembled unit combining the inner panel, outer frame, and hinge mechanism. Factory water-resistant seals restore the structural rigidity and the IPX8 rating the Z Flip 3 shipped with.
4. Precision Component Migration
The motherboard, dual 12MP rear camera system, and internal sensors transfer into the new frame. Every flex cable passing through the hinge is routed to factory specification to prevent pinch points over future folding cycles.
5. Sensor Calibration
Technicians verify the touch digitiser across the full crease area, the response of the side-mounted capacitive fingerprint sensor in the power key, and the software handoff between the cover screen and the main display.
6. Folding Stress Test and Quality Control
Repeated fold cycles confirm a flat 180-degree opening with no resistance or mechanical noise. Protector seating and Samsung performance benchmarks are verified before the device is returned.
FixUPP holds a 4.9-star rating from over 2,400 verified customers on Google, a record built across more than 300,000 repairs since 2014. The verified reviews below come from Melbourne customers across our repair services.
Every Samsung Galaxy Z Flip 3 screen repair works toward the same outcome these customers describe: a clear quote upfront, a fast turnaround, and a repair that lasts.
FixUPP takes full responsibility for any damage caused by a technician. Your device condition is photographed and documented before work begins, so if damage occurs during the repair, the affected part is restored or replaced at no cost to you. Pre-existing conditions recorded at intake sit outside this arrangement.
No. The 12-month warranty covers manufacturer defects, touch malfunctions, and installation errors, not physical damage from drops or impacts. A second crack from an accidental drop needs a fresh repair at standard pricing. FixUPP recommends a protective case plus a tempered glass protector for the Outer Cover Screen.
The Genuine Samsung Service Pack is the right choice for the Z Flip 3. It arrives as a pre-assembled unit with a matched inner panel, outer frame, and hinge mechanism, which matters on a clamshell foldable where panel-to-frame alignment directly affects fold performance. Refurbished pulled screens carry an unknown fold-cycle history, a real concern on a model released in 2021, and lack that frame integration, so the risk of crease misalignment rises over time.
Both are valid, but they suit different priorities. Samsung Authorised Centres use factory parts and may preserve any remaining manufacturer coverage. Independent shops like FixUPP typically offer faster turnaround, more flexible pricing, and the same Genuine Samsung Service Pack parts, plus a 12-month workmanship warranty. FixUPP has completed over 300,000 repairs since 2014, with the specialist tooling and foldable-specific expertise that Z Flip 3 repairs require.
A professional screen replacement with genuine parts has minimal impact on resale value, far less than leaving a cracked or malfunctioning display in place. Buyers and trade-in assessors judge the functional condition of both displays and the hinge, so a properly repaired Z Flip 3 with a clean crease and a smooth fold mechanism holds noticeably more value than one with visible damage.
Back up your data through Samsung Cloud or Smart Switch before you arrive. Turn on Maintenance Mode to protect your personal data, and remove any MDM profiles that could restrict technician access during diagnostics. Bring your charger, note any intermittent faults you have noticed, and remove your SIM card for safekeeping. If the inner display is delaminated, avoid repeatedly folding the device before your appointment, since every extra fold cycle can widen the panel separation.