A drop can damage the touch-sensing layer (digitiser), tear a flex cable or disturb the connection between the screen and the mainboard. Touch can then fail even when the picture looks normal and the glass is intact. A temporary freeze is also possible: restart the phone once, then check whether taps and swipes work across the screen. Persistent dead areas or unwanted taps need a technician’s assessment.
This guide explains which symptoms to check, when to stop using a dropped phone, and what you can safely try at home. It also covers the parts involved, why to back up promptly, and what to ask before approving a repair.
Warning signs that mean a dropped phone should be switched off
Switch off the phone, disconnect its charger and arrange an assessment if you notice:
- Unusual heat or a temperature warning: Let the phone cool in a ventilated place away from direct sunlight.
- Swelling or a lifting screen: Avoid pressing the screen back down or squeezing the phone into a tight case.
- A bent frame: Keep the phone flat and avoid trying to straighten it.
- Liquid exposure: Leave it off and do not charge it. Drying the outside does not remove liquid or corrosion inside.
- Cracked or loose glass: Stop touch tests to avoid cuts from sharp edges.

Which touch symptoms point to what after a drop?
- Normal picture, no touch anywhere: The phone is displaying an image, but touch input is failing. Restart once; if taps still do nothing, have the touch layer and its connection checked.
- One area ignores taps or swipes: A dead zone points towards a local touch fault. Note where it happens and whether it is the same area in different apps.
- Taps or swipes happen by themselves: This is ghost touch. Avoid entering passwords or making payments while the phone is registering unintended input; arrange a diagnosis.
- Black screen, but the phone rings or vibrates: The phone is running while display output is failing. Have a technician check the image and touch functions together.
Touch that fails only in one app is worth checking separately: return to the home screen and try another app. If both work normally, close and update the affected app.
Safe checks you can run without opening the phone
For an intact phone that is safe to handle, start with one restart. A force restart can clear a freeze without erasing your files.
- iPhone 8 or later, including SE (2nd and 3rd generation): Press and quickly release Volume Up, then Volume Down. Hold the Side button until the Apple logo appears. Older iPhones use a different button sequence.
- Recent Samsung Galaxy models: Hold the Side key and Volume Down together for more than seven seconds, until the phone restarts.

- Remove accessory interference: Disconnect the charger and other wired accessories. Remove a removable case or screen protector and take off gloves. Leave the factory-fitted inner film on a Galaxy Z Fold or Z Flip in place.
- Clean and dry the surface: Use a soft, dry cloth to remove moisture or debris from intact glass. Then test with clean, dry fingers.
- Check a dead area on Android: Slowly drag from the top-left corner to the bottom-right without lifting your finger. If the notification shade releases midway, repeat the test and note whether it stops at the same point.
- Check for a downloaded app: On Android, use Safe mode following your model’s instructions. If touch works there, remove recently downloaded apps one at a time and retest.
If you can still navigate a Galaxy, open Samsung Members and select the Touch screen test under Phone diagnostics. The entry point is Diagnostics or Support, depending on the app version. Record any areas that fail.
For slow or patchy Galaxy touch, the Galaxy touchscreen troubleshooting guide also covers settings that change how taps and gestures respond.
If touch returns, back up promptly. A fault that comes back still needs checking.
If touch stays dead or repeatedly fails in the same area after these checks, arrange a diagnosis. Leave internal connectors to a technician, and avoid pressing, bending or twisting the phone to make touch return.
Will a factory reset fix touch after a drop?
No, it will not repair damage from the drop. A factory reset erases local data and changes the phone’s software; it cannot mend the digitiser, a torn cable or a damaged board connection. Reserve it for software troubleshooting after backing up, rather than using it as the first response to impact damage.
What can be damaged inside a phone after a drop?
Cover glass versus the touch layer
The cover glass protects the screen; the touch-sensing layer detects your finger, and the LCD or OLED panel produces the image. A crack can affect the glass alone or reach the layers underneath. Checking the picture and touch response separately helps you discuss glass-only repair or screen replacement with a technician.

Digitiser or integrated display assembly
Impact can damage the digitiser’s sensing circuitry, causing dead areas, missed taps or ghost touch. Many modern phones bond or integrate the touch layer with the display panel, so a failed touch layer is usually repaired by replacing the display assembly for that model.
A damaged or loose display flex connection
Flexible cables carry signals between the screen assembly and the mainboard. A torn cable, damaged socket or poorly seated connector can interrupt touch. A technician checks the cable and connector, then reseats an intact loose connection or replaces a damaged part as appropriate.
The logic-board touch path
The mainboard processes touch signals. A heavy impact can damage board connections or components. If touch still fails with a tested working screen assembly, further board checks help identify the fault and whether a board repair is needed.
Backing up a phone before a diagnosis
Back up as soon as reliable touch returns and the phone is safe to use. Touch may fail again, leaving you unable to unlock the phone or access files. A repair that involves erasing software or replacing the mainboard can also affect stored data.
Check that your latest photos, contacts and important files are included in a completed backup. If you cannot unlock the phone, tell the repairer that preserving data is a priority before work starts. Samsung’s broken-screen data-transfer guide covers options for compatible Galaxy devices.

Booking a professional diagnosis for a dropped phone
Book a diagnosis when touch remains dead, patchy or erratic after the safe checks. Give the repairer your phone model, how it landed, which areas respond, and whether another function stopped working at the same time.
Before approving work, ask which part needs repair or replacement, the total price, the expected turnaround and the warranty for that repair. A touch-layer fault, a damaged connection and a mainboard fault require different work.
What happens at a FixUPP assessment?
For a dropped phone, we check whether the problem affects touch, the displayed image or both, alongside the phone’s physical condition. We explain whether a screen replacement is appropriate or further diagnosis is needed, and provide a quote before you approve a repair.

You can book a repair with your model and a description of the symptoms. For customers in Melbourne’s south-east, the FixUPP Springvale repair centre is at 21/268–274 Springvale Road.
If touch remains dead or unreliable after the safe checks, have the fault diagnosed before paying for a replacement screen. Back up while you can still access the phone. Bring the phone and your test results to FixUPP, where we can assess the problem and explain what needs repair before you approve the work.

